1. Turn on the hotspot on this computer so that 3D printers (2.4G, 3D, dyermake) can connect automatically. 
  2. Login to Bambulab slicer with Google (dyer3d@gmail.com, dyer12345). 
  3. Apply material of choice to your parts and slice your parts; make sure the correct material type is loaded (PETG, PLA, PA, etc) in the correct slot of the AMS holder (1,2,3,4), make sure the right bed plate (PEI Textured Plate, Engineering Plate, etc.) is selected in the slicer. 
  4. Print!

Please clean up and undo any “advanced” modifications you might have made.

Do not fingernail thin parts off the bed!